Ask Question Forum:
Model Library:2025-02-08 Updated:A.I. model including DeepSeek is online for auto reply question page
C
O
M
P
U
T
E
R
2
8
Show
#
ASK
RECENT
25-06-28 16:30:14
Wilson Edwards
Reply:3
Post_ID:829370google adsense
as TitlePlease advise
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
25-06-28 16:00:17
Wilson Edwards
Reply:0
Post_ID:829369googles adsense
As TitlePlease advise
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
25-06-27 11:44:47
Wilson Edwards
Reply:2
Post_ID:829367googleads;drive traffic;adsense
I read some outside third-party company to prompt driving web traffic to my website to increase my google adsense revenue.How are they able to do ?During driving traffice to my website, it will create google adsense impression or not ?Google will treat that impression is invalid ?Please advise
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
25-06-27 11:02:02
Wilson Edwards
Reply:0
Post_ID:829368googleads;invalid traffic
I read some outside third-party company to prompt driving web traffic to my website to increase my google adsense revenue.How are they able to do ?During driving traffice to my website, it will create google adsense impression or not ?Google will treat that impression is invalid ?Please advise
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
25-05-05 20:08:11
test test
Reply:3
Post_ID:829366googlebot;crawler;cloudflare
Accept
How my website can use cloudflare with"Under Attack Mode" and be able to allow goolge bot, crawler to crawl my website pages at the same time ?Please advise
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
25-04-17 16:26:31
Wilson Edwards
Reply:1
Post_ID:829365css;html
Accept
as title Please advise
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
25-04-14 19:42:56
Wilson Edwards
Reply:5
Post_ID:829364javascript
Accept
Please adviseThanks
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
25-04-14 01:47:39
Wilson Edwards
Reply:2
Post_ID:829363javascript
I have set iframe addEventListener with mousedown event, it works becoz the iframe source is same domain ofthe current page..For example<iframe id=''myiframe" src='https://samedomian.com//test.html'></iframe><script>document.getElementById("myiframe").addEventListener('mousedown, function () {console.log('mousedown event detected');});</script>But when I change iframe src to external domain or cross-domin such as https://example.comit doesn't work, the reason it is blocked by cross-dmain policyAny mothed to solve this issue, how to detect mousedown event on iframe ?
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
25-04-14 01:22:51
Wilson Edwards
Reply:2
Post_ID:829362javascript
For example, I have a link in DIV-A tag now I can not click the link in DIV-A because it is covered by DIV-B I want to click the link DIV-A anyway. I tried this example, it work at https://computer28.com/learn/pointer-events.php Any other good example or other method to achieve this ? Please advise
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
25-03-28 09:26:04
Wilson Edwards
Reply:5
Post_ID:829361google_drive;php;centos8
I would like to download all my google_drive files by using php program code onmy linux centos 8 system server, how to it ?How to get the google API key to start download for php program ?Since the download file size is very huge, how can I speed up the download the file ifits size is more 100G size ?Please advise
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
25-03-12 23:38:28
Wilson Edwards
Reply:1
Post_ID:829360javascript;html;css
Accept
I would like to create child node inside of body tag and enclosing all elements inside body tagby javascript code;For example:Before:<html><body><div></div><a></a><span></span></body></html>After, if I would like to see this reuslt, creating new div tag enclose everything inside of body tag, new div tag 's id is new_child_nodeAfter:<html><body><div id='new_child_node'><div></div><a></a><span></span></div></html></body>Please advise
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
25-03-03 21:46:28
test test
Reply:4
Post_ID:829359cloudflare;proxy;socket;python;centos 8;apache
I am using cloudflare to protect my website recently,but I have a page which is using python socket to send streaming data to visitor with 5000 portsuch as http://mywbesite.com:5000.Before using clouldflare, visitor can get data from port 5000, now after usingcloudflare, all visitors to my website can not get any data from port 5000.Now I pause cloudflare, the python socket port is working back again..The question is I would to like to keep all cloudflare service such as proxy but python socket port need to work for exception by cloudflare, how can I do that ?My Simple python socket code:from flask import Flask, render_template, request, session,jsonifyfrom flask_sse import ssefrom flask_socketio import SocketIO, emit, join_roomimport platformimport loggingfrom flask_cors import CORSimport socket....if __name__ == "__main__": app.run(host="0.0.0.0",debug=False, port=5000, ssl_context=("mycert")
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
25-03-02 21:19:15
test test
Reply:3
Post_ID:829358cloudflare;VPN;proxy;linux;apache
My website is using cloudflare internt traffic protection.I am using php code to monitor all internet ip through chrome browser to my websitefor example, monitoring $_SERVER['HTTP_X_FORWARDED_FOR'] and$_SERVER['REMOTE_ADDR'];I try it in those different computers with different ISP ip, I found the result as followsCase-1 Computer A,$_SERVER['HTTP_X_FORWARDED_FOR']="51.58.202.19";$_SERVER['REMOTE_ADDR']="172.64.0.0"where51.58.202.19 is my Compuer A ISP ip and172.64.0.0 is cloudflare use proxy server to get the webpage for Computer A.Case-2 Computer B,$_SERVER['HTTP_X_FORWARDED_FOR']="61.85.102.11";$_SERVER['REMOTE_ADDR']="61.85.102.11"where61.85.102.11is my Compuer B ISP ip and$_SERVER['HTTP_X_FORWARDED_FOR']=$_SERVER['REMOTE_ADDR']My question is Why in case-1 Cloudflare will use proxy to get webapge for computer A butcloudfare don't use proxu to get wbepage for computer B in which both php ip is same from$_SERVER['HTTP_X_FORWARDED_FOR']=$_SERVER['REMOTE_ADDR'] ?Second question, in what condition ro when Cloudflare use proxy or not use proxy to get webpage for browser visitor?Final question isIf cloudflare use proxy , it mean visitors of Computer A, ISP IP maybe bot or maliciousor suspected IP , Can I release Google Ads on my webste and allow the vistior of Computer A to click the ads ? If the visitors click the ads, it mean the click is excuted from Computer A, ISP IP or from Cloudflare 's proxy IP ?Please advise
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
25-03-02 12:50:13
test test
Reply:2
Post_ID:829357cloudflare;google chrome;apache
Question 1- Cloudflare show warning, too may redirect on chrome solvedAnswer: solved by removing all redirect from http to https since cloudflare will handleall redirect from http.Since in apahce httpd.conf, we added the following for http to https and except some directorybased on this linkhttps://stackoverflow.com/questions/5818146/how-to-force-rewrite-to-https-except-for-a-few-pages-in-apache#RewriteEngine on#RewriteCond %{SERVER_NAME} =computer28.com [OR]#RewriteCond %{SERVER_NAME} =www.computer28.com#RewriteRule ^https://%{SERVER_NAME}%{REQUEST_URI}[END,NE,R=permanent]#RewriteEngine on#RewriteCond %{HTTPS} =off#RewriteCond %{REQUEST_URI} !^\/local\/#RewriteCond %{REQUEST_URI} !^\/world\/#RewriteRule (.*)https://%{HTTP_HOST}/$1[L,R=301]#RewriteCond %{HTTPS} =on#RewriteCond %{REQUEST_URI} \/fid\/ [OR]#RewriteCond %{REQUEST_URI} \/php\/#RewriteRule (.*)http://%{HTTP_HOST}/$1[L,R=301]Comment it all, it works nowQuestion-2:How to Fix ERR_QUIC_PROTOCOL_ERROR Message in Chrome Browserwhen using cloudflareAnswer-2https://kinsta.com/knowledgebase/err_quic_protocol_error/https://www.hostinger.com/tutorials/how-to-fix-err-quic-protocol-errorchrome://net-internals/#dnsHTTP/3 Cheker:https://http3check.net/?host=computer28.comhttps://kinsta.com/knowledgebase/flush-dns/on Window 10:ipconfig /flushdns //clear all DNS cachingFinal, if still can not solve question-2, delete cloudflare account and then re-create new other account using other gmail accout to see any help from resetting all cloudflare default setting.Need to wait 1-day or 2-day. to see theERR_QUIC_PROTOCOL_ERROR will be sovledor not...If above answer can not be solved, any suggestion or solution to solve those those bothquestions,Please advise
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
25-03-01 19:03:13
Wilson Edwards
Reply:2
Post_ID:829356centos 8
as title for the question, I read the link,https://devco.re/blog/2014/06/19/client-ip-detection/ it works , for php as following code., Any other method besides php code, to dectect the ip is real ip not VPN not TOR IP not proxy IP?<?php if(!empty($_SERVER['HTTP_CLIENT_IP'])){ $myip = $_SERVER['HTTP_CLIENT_IP']; }else if(!empty($_SERVER['HTTP_X_FORWARDED_FOR'])){ $myip = $_SERVER['HTTP_X_FORWARDED_FOR']; }else{ $myip= $_SERVER['REMOTE_ADDR']; } echo $myip; ?>
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
25-03-01 17:56:38
Wilson Edwards
Reply:2
Post_ID:829355google ads;cloudflare
Google Ads can be shown if my website is using cloudflare protection ? and next question isCloudflare can protect my websie from Bot Fraud Click on my website Google Ads.My Cloudflare account is free version Cloudflare.Please advise
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
25-02-28 00:17:59
Wilson Edwards
Reply:4
Post_ID:829354google;reCAPTCHA
I just created reCAPCHA fromg google site athttps://www.google.com/recaptcha/admin/createand following his instruction, created my first reCAPCHA html page such as follows<!DOCTYPE html><html lang="en"><head><script async defer src="https://www.google.com/recaptcha/api.js"></script></head><body><div class="g-recaptcha" data-sitekey="6LcIhOQqAAAAAGbMD-QaT-xjh9VYF87D7w6uMw4n"></div></body></html>The page is successful and show google reCAPCHA, but it will ask me to do image testCan I bypass the image test, just tick the I am not a rebot box only ?Please advise
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
25-02-26 04:32:58
Ty Yt
Reply:1
Post_ID:829353Linux apache
As tilte
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
25-02-25 04:28:14
Wilson Edwards
Reply:2
Post_ID:829352centos;linux
I am using linux command, host, to check the revserse ip , some is not found but if I am using, online tool, that IP is normal, not abusive ipHow to check the IP is abusive ?
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
25-02-23 19:30:17
Wilson Edwards
Reply:3
Post_ID:829351香港樓市;Hongkong housing price
Accept
香港樓市, 現在買 Okay ?
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
25-02-23 17:06:22
Wilson Edwards
Reply:4
Post_ID:829348google adsense
Accept
my website server is new or small server, recently, just start up my server width Google Adsense ads into my site.DUring, these past 7-day, I get page view not much, but have 50 impression and 20 click dailyI check all my apache log file, those access to my wbesite is not too freqently, butToday Google banned my Google Adsense Account, including this time, Google already banned my site for 5-time.The reason is invalid traffic, I have already followed all rules from GooglePlease advise
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
25-02-20 15:15:06
su e
Reply:1
Post_ID:829347excel vba 技術趨勢圖陰陽燭
excel vba 技術趨勢圖陰陽燭
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
25-02-18 17:05:47
w kk
Reply:3
Post_ID:829345葵芳地鐵站葵涌廣場鋪位
葵芳地鐵站葵涌廣場鋪位
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
25-02-18 16:46:59
w kk
Reply:1
Post_ID:829344why we use
as tile
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
25-02-18 16:43:41
w kk
Reply:1
Post_ID:829343bitcoin
as title
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
25-02-18 16:33:55
w kk
Reply:2
Post_ID:829342as title
Accept
as title
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
25-02-15 21:18:40
Wilson Edwards
Reply:7
Post_ID:829340google;adsense;crawler
Accept
I just want disallow Google search indexing engine to access all my files and all my directories except some files such as index.php and music.png and let ads.txt can be crawled by Google Adsense Crawler Please advise
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
25-02-12 00:53:08
Norton Alex
Reply:1
Post_ID:829260javascript
my question is same as the title And, I search it on internet, the closer one is this link https://stackoverflow.com/questions/3538021/why-do-we-use-base64 Any good article about this topic Regards
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
25-02-12 00:48:17
Wilson Edwards
Reply:2
Post_ID:829290window10/11;apache;centos;php;html
Accept
After clicking some Googe Ads and leave the ads site or delete the tab, your browser may forwards you to other site which may give you message such as "Congrulation,! You Get Prize, Bonus, Coupon.etc" Probably your browser is infected by virus and the Congurlation site is hacker /attacker virus site.. I will think the following methods to solve my problem, Please advise those methods are correct 1- Right away or now, remove the forwars site(Congrulation site) or delete such browser Tab 2- Look at this image: https://computer28.com/image/deletecache.jpg Delete or clean your chrome browser data At Chrome browser, Click Sitting->Privacy Security->Delete Browser Data, it will pop up window, in that window, Click Advanced->Select Time Range(All Time)->Tick all box below Time range such as Browsering History..etc. Click Delete Data button 3-If using Window 10, Turn on Microsoft Defender Virus Protection System, always turn it on https://carleton.ca/its/help-centre/how-to-enable-windows-defender-on-personal-pc/ You are better to install Microsoft Window 11 if u are using WIndow 10 4- Add X-Content-Type-Options: nosniff on header at my apache server
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
25-02-12 00:32:47
Norton Alex
Reply:3
Post_ID:829339centos;apache;php;html
Accept
as title with the topic tag
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
25-02-11 17:12:06
test test
Reply:2
Post_ID:829338centos;linux;A.I.
I would like to stop all A.I. access my website through VPN or TOR browser,How I know the A.I. is accesing into my website pagesPlease advise
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
25-02-11 17:07:11
Wilson Edwards
Reply:1
Post_ID:829291javscript;google_cookie
For latest browser, u can only read cookie value by javascript code. Remove and Update cookie by javascript is very difficult...To read all cookie, u can go to devtool, Mouse Right-click->inspect->Application->Cookieu can see all website cookie u are accessing..You can remove all cookie for the website..by php codingFor example:<?phpif(isset($_SERVER['HTTP_COOKIE'])&&stripos("#".$_SERVER['QUERY_STRING'],'gt=3')>0){$cookies = explode(';', $_SERVER['HTTP_COOKIE']);foreach($cookies as $cookie) {$parts = explode('=', $cookie);$name = trim($parts[0]);setcookie($name, '', time()-1000,'computer28.com');setcookie($name, '', time()-1000, '/','computer28.com');setcookie($name, '', time()-1000,'.computer28.com');setcookie($name, '', time()-1000, '/','.computer28.com');}}if(stripos("#".$_SERVER['QUERY_STRING'],'gt=3')>0){header("location:https://computer28.com"); }?>On address bar with gt=3, it will forward to the main domain site,For update cookie,justsetcookie($name, ''', "the time you want for expire",'computer28.com');Hope it help
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
25-02-11 16:38:06
Wilson Edwards
Reply:1
Post_ID:829337google search;SEO
I would like to set requirement to let google seach engine to index all my website pages, just allow some pages of my website can be indexed by Google..How I can setup the system or requirement for the pages selected to be indexed from robots.txt or sitemap ?Please advise
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
25-02-11 11:25:10
Wilson Edwards
Reply:5
Post_ID:829335hongkong food
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
25-02-10 21:49:16
Wilson Edwards
Reply:4
Post_ID:829336centos; bash
Accept
I am using bash linux shell, running ollama serve on CLI console is working, but when it can not work on cron job scheduler, why
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
25-02-10 14:17:47
Wilson Edwards
Reply:5
Post_ID:829333php; html;javascript
Accept
In php script, if echo "<a></a>" it render as html elementas we understand it, but when doing in php, $str=htmlentities("<a></a>"); then $str=html_entity_decode($str); $str is not equal to "<a></a>", $str is string. why that is not HTML element
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
25-02-09 20:46:03
Wilson Edwards
Reply:3
Post_ID:829332javascript;html5;css
Accept
as title with topic tagPlease advise
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
25-02-09 10:49:51
Wilson Edwards
Reply:1
Post_ID:829325chrome;curl;php;python3.9
Accept
I would like to distinguish between those vistors are A.I. or real human to access my website.For example, some A.I. will use VPN and automaticlly access my website through, for example, curl or other methdos, I would like to block those A.I. auto crwaling IP and trafficPlease advise
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
25-02-09 10:32:17
Wilson Edwards
Reply:1
Post_ID:829324javascript;html5;css
Accept
as title and topic tagPlease advise
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
25-02-07 01:07:31
Wilson Edwards
Reply:0
Post_ID:829299gcc;linux
When upgrade gcc or lib, it will cause issue, and may cause reboot is not working for exmaple: https://blog.csdn.net/qq_39295044/article/details/86685789 su root Password: node: /lib64/libc.so.6: version `GLIBC_2.18' not found (required by /lib64/libstdc++.so.6) nvm is not compatible with the npm config "prefix" option: currently set to "" Run `nvm use --delete-prefix v16.20.2 --silent` to unset it. For example, running ------------------- node node: /lib64/libc.so.6: version `GLIBC_2.18' not found (required by /lib64/libstdc++.so.6) Or php php: /lib64/libc.so.6: version `GLIBC_2.18' not found (required by /lib64/libstdc++.so.6) after re-install glibc at /usr/local and run nvm use --delete-prefix v16.20.2 --silent` //for node other issue now ok, php and node but got some error when install python3.9 version rm -f /usr/local/glibc-2.18/build/stubs.h /usr/local/glibc-2.18/build/elf/sln /usr/local/glibc-2.18/build/elf/symlink.list rm -f /usr/local/glibc-2.18/build/elf/symlink.list test ! -x /usr/local/glibc-2.18/build/elf/ldconfig || LC_ALL=C LANGUAGE=C \ /usr/local/glibc-2.18/build/elf/ldconfig \ /lib64 /usr/lib64 LD_SO=ld-linux-x86-64.so.2 CC="gcc -B/usr/bin/" /usr/bin/perl scripts/test-insta llation.pl /usr/local/glibc-2.18/build/ /usr/lib/gcc/x86_64-redhat-linux/4.8.5/../../../../lib64/libm.so: undefined refe rence to `__strtod_nan@GLIBC_PRIVATE' /usr/lib/gcc/x86_64-redhat-linux/4.8.5/../../../../lib64/libm.so: undefined refe rence to `__strtof128_nan@GLIBC_PRIVATE' /usr/lib/gcc/x86_64-redhat-linux/4.8.5/../../../../lib64/libm.so: undefined refe rence to `__strtof_nan@GLIBC_PRIVATE' /usr/lib/gcc/x86_64-redhat-linux/4.8.5/../../../../lib64/libm.so: undefined refe rence to `__strtold_nan@GLIBC_PRIVATE' collect2: error: ld returned 1 exit status Execution of gcc -B/usr/bin/ failed! The script has found some problems with your installation! Please read the FAQ and the README file and check the following: - Did you change the gcc specs file (necessary after upgrading from Linux libc5)? - Are there any symbolic links of the form libXXX.so to old libraries? Links like libm.so -> libm.so.5 (where libm.so.5 is an old library) are wrong, libm.so should point to the newly installed glibc file - and there should be only one such link (check e.g. /lib and /usr/lib) You should restart this script from your build directory after you've fixed all problems! Btw. the script doesn't work if you're installing GNU libc not as your primary library! make[1]: *** [install] Error 1 make[1]: Leaving directory `/usr/local/glibc-2.18' make: *** [install] Error 2 Change libm.so link to 2.18 version Make sure glibc, libc.so libm.so is same version
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
25-02-07 00:06:18
Wilson Edwards
Reply:6
Post_ID:829297python3;centos;deepseek
Accept
Could not install ollama from python3 install ollama...so try alternative ,using python3 install openai , but easy example python script still not working, , the error is such as AttributeError: module 'ollama' has no attribute 'chat' import ollam //or improt openai response = ollama.chat(model="deepseek-r1", messages=[ { "role":"user", "content":"how center a tag in a div tag by javascript" }, ]) print(response["message"]["content"]) OR next example: import os import openai openai.api_key = ("key") openai.ChatCompletion.create( model="gpt-3.5-turbo", messages=[ {"role": "user", "content": "Hello!"} ] ) print(completion.choices[0].message) // Error AttributeError: module 'ollama' has no attribute 'ChatCompletion' if use comand line ollama, it works > ollama server //need enable port 127.0.0.1:11434 > ollam run deepseek-r1 >>>>"chat" Any Advise ? Try to list all module : print(dir(ollama)) //No any moduel name, chat... Error: Command '['/home/..../venv/bin/python3.x', '-Im', 'ensurepip', '--upgrade', '--default-pip']' returned non-zero exit status 1 https://stackoverflow.com/questions/24123150/pyvenv-3-4-returned-non-zero-exit-status-1 Reference: https://cristianzsh.medium.com/installing-and-using-deepseek-ai-c7fd97332e0f https://stackoverflow.com/questions/2927993/where-are-the-python-modules-stored https://pypi.org/project/ollama/ https://python.langchain.com/docs/integrations/chat/ollama/ https://ollama.com/search https://hungchienhsiang.medium.com/error-could-not-find-a-version-that-satisfies-the-requirement-from-pip-install-f542143e705d https://ywctech.net/ml-ai/ollama-first-try/ https://github.com/ollama/ollama-python https://github.com/ollama/ollama
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
25-02-05 00:23:20
Wilson Edwards
Reply:1
Post_ID:829298python
Accept
I try to upgrade my python version from 3.6 to 3.9 I also get ,glibc error /lib64/libm.so: undefined reference to `__strtod_nan@GLIBC_PRIVATE' and solved it ....just checked all glibc, libm , libc, all version is matched to , for exmaple.2.18version relink, ln -sfn /lib64/libm-2.18.so libm.so.6 //before is libm-2.31.so not matched https://stackoverflow.com/questions/59578152/undefined-reference-to-strtof128-nanglibc-private after the above error solved, I get other errorat make altinstall, got the errorerror _testembed.c:1767: undefined reference to `__gcov_indirect_call_profiler'just following the instruction as reference link Installation python 3.9 reference: https://phoenixnap.com/kb/how-to-install-python-3-centos-7 https://blog.csdn.net/liuruiaaa/article/details/130890408
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
25-02-02 21:48:44
Wilson Edwards
Reply:0
Post_ID:829296virtualbox;macOS;window11
Read this link https://computer28.com/hk/article/install-macos-virtualbox.doc.php
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
25-02-01 22:06:35
Wilson Edwards
Reply:0
Post_ID:829288python;javascript;simulation
Basic Concept: https://www.youtube.com/watch?v=IrbJYsep45E&t=663s https://www.youtube.com/watch?v=JOJ5zihcd6Q Google 's Willow Chip for quantum computing: https://www.youtube.com/watch?v=G3o4sPpGWFI https://www.youtube.com/watch?v=FgZ-8NFSysA&t=134s https://www.youtube.com/watch?v=CMO1MEeUcXg Shor's Algorithm: https://www.youtube.com/watch?v=FRZQ-efABeQ https://www.geeksforgeeks.org/shors-factorization-algorithm/ Simulator quantum computing by python: https://github.com/lvillasen/Quantum-Computer-Simulator IBM quantum simulator/platform for public: https://en.wikipedia.org/wiki/IBM_Quantum_Platform (Some region is blocked by IBM,u can use VPN from Chrome VPN Extension) Basic GCD, greatest common divisor: https://en.wikipedia.org/wiki/Greatest_common_divisor How it works: https://www.youtube.com/watch?v=g_IaVepNDT4&t=63s https://www.youtube.com/watch?v=c0D8X4eN_Cg&list=PLnK6MrIqGXsJfcBdppW3CKJ858zR8P4eP https://www.youtube.com/watch?v=XuN6sF8UGSw
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
25-02-01 21:42:42
Norton Alex
Reply:1
Post_ID:829295javascript
Accept
my html page calling many javascript file, I worry, some function name will be double or over-written by each other. Any method to prevent this .Please advise;
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
25-02-01 21:15:33
Norton Alex
Reply:2
Post_ID:829294javascript
Accept
I have seen a lot javascript file whcih starting with "!" character before functionWhat is the purpose of that ?For example;!function(x){a=x}()Please advise
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
25-01-29 21:04:40
Wilson Edwards
Reply:4
Post_ID:829293javascript;python3;chrome
Visitors or users may open many page of website to get streaming data ,and they want to open many browser tabs to read different data. That will depend on your Laptop or mobile capiblity how can handle many new socket.io to run on multiple tab at the same time, If limited computer resouce or memory, you will be limited for number of browser tabs display.If u use socket with Redis /stream event that allow display directly into html page tab (just type https://yourdomain:5051/stream on address bar) or throught javascript parse data into html page but it may only allow 3 tabs running on the same time.How you can run it on many tabs ?-----------------------------------------------1-You can use localStorage(getItem or setItem) to share information between browser tabOr...you can use2-window.addEventListener('blur', notstream);window.addEventListener('focus', stream);When the user not read or not focus the tag, close the streaming socketio, then Whenthat users want to read it again and focus the tag, reconnect the socket. We know users only can read 1 tag at a time only,function notstrem(){souce.close();//close the socket.io}function stream(){//user focus the tab againrefresh();// re-run that funation u can stream data before}function refresh(){//Redisvar source = new EventSource("https://yourdomainsocket-site.com"+":5051/stream"); source.addEventListener('publish', function(event) {dataextract(event.data);if (typeof ws=='function')ws(event.data);if (typeof updatechart=='function')updatechart(event.data); }, false); source.addEventListener('error', function(event) { }, false);return source;}let source=null;jQuery(document).ready(function($) {console.log("onload");source=refresh();});
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
25-01-23 19:49:42
Wilson Edwards
Reply:5
Post_ID:829292javascript;jquery;php
$(document).click(function(e) { // ####Check for left button if (e.button == 0) { // alert('clicked'); console.log('page......clicking'); checkhitrate('ads_hitrate');//check the document.activeElememnt source such as ifram or <a> tag }else {}});it works but can not detect mouse right click or mouse left click;so try to other code such as followsvar mouseleft=null;document.addEventListener('mousedown', function(event) { switch (event.button) { case 0: mouseleft=1; checkhitrate('ads_hitrate'); console.log('mouse Left button clicked.'); break; case 1: mouseleft=0; console.log('mouse Middle button clicked.'); break; case 2: mouseleft=0; console.log('mouse Right button clicked.'); break; case 3: mouseleft=0; console.log('mouse Browser Back button clicked.'); break; case 4: console.log('Browser Forward button clicked.'); break; default: console.log('Unknown button clicked.'); }});*/it is working ok, but not work if the content area with iframe...so we need use blur as followswindow.addEventListener('blur', notFocused);function notFocused() { localStorage.setItem('focus','0');setTimeout(()=>{$(window).focus();},200);checkhitrate('ads_hitrate');console.log('NOT focused',ia2++);return 0;}and check whether visitor leave current page to forward to other site, use this function becoz we can not idenity it is right or left click.if .onbeforeunload even is triggered it mean it is from left clickwindow.onbeforeunload=function(e){ console.log('hist-onbeforeunload'); localStorage.removeItem("stateHistoryonbeforeunload"); localStorage.setItem("stateHistoryonbeforeunload", 1);}event onbeforeunload should be earlier than checkrate();function checkhitrate(hitrate){ if (hitrate=='ads_hitrate')sendclick();}function sendclick(){if (document.activeElement.src) var tmp=document.activeElement.src ; else tmp=""if (document.activeElement.tagName === "IFRAME"){if (tmp.indexOf('client=ca-pub-')>0){setTimeout(()=>{console.log('notfocused _post3',"stateHistoryonbeforeunload",localStorage.getItem("stateHistoryonbeforeunload"));document.activeElement.blur(); if (localStorage.getItem("stateHistoryonbeforeunload")=="1"){_post3(url,JSON.stringify(obj),fun);localStorage.removeItem("stateHistoryonbeforeunload")}},200);}}Note: every click then clear last document.activeElement by document.activeElement.blur() so next check click will be working again
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
24-12-31 23:06:18
Wilson Edwards
Reply:0
Post_ID:829289economy
https://www.investopedia.com/terms/t/trilemma.asp https://en.wikipedia.org/wiki/Trilemma Example Video: https://www.youtube.com/watch?app=desktop&v=pNlUmPZ1UC4 Any region is only able to do 2 options from the following 3 choices for itseconomy system at the same time, 3 choices: A=Independent monetary policy(獨立自主貨幣政策), B=fixed Exchange Rate(固定匯率) ,C=Free Flow of Capitial(資本自由流動)For example:USA: ACHongkong: BCChina:AB
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
24-11-27 13:34:32
Wilson Edwards
Reply:2
Post_ID:829287yoututbe
Accept
as the title, which online site is the bestPlease advise
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
←
- Underline
- Bold
- Italic
- Indent
- Step
- Bullet
- Quote
- Cut
- Copy
- Paste
- Table
- Spelling
- Find & Replace
- Undo
- Redo
- Link
- Attach
- Clear
- Code
Below area will not be traslated by Google,you can input code or other languages
Hint:If find spelling error, You need to correct it,1 by 1 or ignore it (code area won't be checked).
X-position of the mouse cursor
Y-position of the mouse cursor
Y-position of the mouse cursor
Testcursor
caretPos
Attachment:===
X server and Xterm on my Linux server
Asked by duncanb7
at 2024-04-30 05:53:58
ModifyPoint:500 Replies:37 POST_ID:828492USER_ID:11059
Topic:
Linux;;Windows XP Operating System
I would like to use web browsers(Opera http://www.opera.com/download/index.dml?platform=linux)
in my Linux server and display it to my home window XP PC.
First step, I try to download all x server software to my PC and it can't connect to my server because it needs
to do a command Xterm, X something like that, and I don't know where is the path of such as demo tool such as xcalc , xclock
and xterm, x utility.
When I go to back to my linuxer server, run xterm, xcalc, xclock, it report no such command.
I would like to how can I know my domain server can run x server and xterm
I get confused with those x server and xterm, what is diffferent ?
And we need to run x server on Window XP as well as on Linux server, RIght ?
And I look at this tutorial, and get more confused since there is one more term SSH.
http://www.vanemery.com/Linux/XoverSSH/X-over-SSH2.html
Anyone could help me to start to my web broswer on my linux server and display it to my window XP PC step by step.
Please advise
Since I need to run php program at server and get data from one website so I choose to run broswer in linux instead of
IE on xp because it is no need to ftp my data into server in order to redue the excution time for more 100 files.
Duncan
Duncan
in my Linux server and display it to my home window XP PC.
First step, I try to download all x server software to my PC and it can't connect to my server because it needs
to do a command Xterm, X something like that, and I don't know where is the path of such as demo tool such as xcalc , xclock
and xterm, x utility.
When I go to back to my linuxer server, run xterm, xcalc, xclock, it report no such command.
I would like to how can I know my domain server can run x server and xterm
I get confused with those x server and xterm, what is diffferent ?
And we need to run x server on Window XP as well as on Linux server, RIght ?
And I look at this tutorial, and get more confused since there is one more term SSH.
http://www.vanemery.com/Linux/XoverSSH/X-over-SSH2.html
Anyone could help me to start to my web broswer on my linux server and display it to my window XP PC step by step.
Please advise
Since I need to run php program at server and get data from one website so I choose to run broswer in linux instead of
IE on xp because it is no need to ftp my data into server in order to redue the excution time for more 100 files.
Duncan
Duncan
Author: duncanb7 replied at 2024-04-30 12:25:38
I know it I need it in the future. But if some application is only on Linux and no on Window , it might be useful
Expert: arnold replied at 2024-04-30 12:09:23
Xcomponents are an unnecessary overhead on a server. Why did you get this server in the first place? Do you need it to host your website, mail , database? For all of these you do not need graphical components.
Author: duncanb7 replied at 2024-04-30 11:50:51
So I will request it to re-install in my server later on.
But even I have X on my server, Do I need to install TightVNC server on my server, if so or need, I don't
have right to install it. Is it correct. so there is another problem and need to ask the other request for domain hosting company
I know TightVNC viewer is no issue to install on my PC
But even I have X on my server, Do I need to install TightVNC server on my server, if so or need, I don't
have right to install it. Is it correct. so there is another problem and need to ask the other request for domain hosting company
I know TightVNC viewer is no issue to install on my PC
Expert: Kerem ERSOY replied at 2024-04-30 11:42:41
Yeah sn fact if you will have X access to your server :
- You need administrator access to setup X on it
or
- It should be already installed.
but this will not happen unless it is a dedicated server or VPS.
Another point is X performance has nothing to do with Graphics accelerator card settings since the screen image is actually drawn on the client side. This holds for both Windows and Remote X access though.
- You need administrator access to setup X on it
or
- It should be already installed.
but this will not happen unless it is a dedicated server or VPS.
Another point is X performance has nothing to do with Graphics accelerator card settings since the screen image is actually drawn on the client side. This holds for both Windows and Remote X access though.
Expert: mrjoltcola replied at 2024-04-30 11:38:20
I agree, if you are paying for this server, demand that the hosting company install X components.
Author: duncanb7 replied at 2024-04-30 11:32:51
Correct:
Thanks for all of your reply
Really Disappointed to my server is no
any X and charge me
Why other people could run Xming
and TightVPN on their Window PC because at least it is two reason
1- they have access right to install
X server on their server
2- the server domain company already install Xserver for users
Is it right ? Please advise at this
last question
Thanks for all of your reply
Really Disappointed to my server is no
any X and charge me
Why other people could run Xming
and TightVPN on their Window PC because at least it is two reason
1- they have access right to install
X server on their server
2- the server domain company already install Xserver for users
Is it right ? Please advise at this
last question
Author: duncanb7 replied at 2024-04-30 11:27:21
Thanks for all of your reply
Really Disappoint my server is no
any X and charge me
Why other people could run Xming
and TightVPN on thier server because at least it is two reason
1- they have access right to install
X server
2- the server domain company already install Xserver for users
Is it right ? Please advise at this
last question
Really Disappoint my server is no
any X and charge me
Why other people could run Xming
and TightVPN on thier server because at least it is two reason
1- they have access right to install
X server
2- the server domain company already install Xserver for users
Is it right ? Please advise at this
last question
Assisted Solution
Expert: Kerem ERSOY replied at 2024-04-30 11:20:07
63 points EXCELLENT
> I know it is better running Opera locally on my PC Windows PC. But it is good graphic testing for
> remote display work.
X does not work like that it has a virtual framebuffer that will be sent to the remote X and it will perform the drawing. So it tells you nothing about Remote Display Work. Furthermore as I've told earlier X relies heavily on fast local network and the performance over remote interne connection will be very lousy.
It is of course better to run some software locally than remotely.
> remote display work.
X does not work like that it has a virtual framebuffer that will be sent to the remote X and it will perform the drawing. So it tells you nothing about Remote Display Work. Furthermore as I've told earlier X relies heavily on fast local network and the performance over remote interne connection will be very lousy.
It is of course better to run some software locally than remotely.
Author: duncanb7 replied at 2024-04-30 11:19:05
At this moment, I am thinking about why I pay for the hosting domain company if there is a lot of "no such command"
If I use the money fee for hosting company to buy a PC and setup as my own server and just buy or rent a domain name
that will be more efficient in cost or work
If I use the money fee for hosting company to buy a PC and setup as my own server and just buy or rent a domain name
that will be more efficient in cost or work
Author: duncanb7 replied at 2024-04-30 11:14:07
I know it is better running Opera locally on my PC Windows PC. But it is good graphic testing for remote display work.
Expert: Kerem ERSOY replied at 2024-04-30 11:10:38
Since there's no X the tightVNC or Xming would do nothing. Also why do you need to install it there is curious instead of setting up locally.
Assisted Solution
Expert: arnold replied at 2024-04-30 10:59:15
62 points EXCELLENT
There is no point installing vnc if you do not have graphical components on the server.
VNC will give you the same terminal access as your putty connection currently provides in a bigger window possibly with a mouse in the display that serves no purpose.
You did not answer why would you want to use a browser (opera) in this fashion when running installing and running the browser locally is better.
VNC will give you the same terminal access as your putty connection currently provides in a bigger window possibly with a mouse in the display that serves no purpose.
You did not answer why would you want to use a browser (opera) in this fashion when running installing and running the browser locally is better.
Author: duncanb7 replied at 2024-04-30 10:48:17
I mean I might give up TightVNC or remote display task unless swtich other server domain provider, Is it Right ?
Author: duncanb7 replied at 2024-04-30 10:46:20
Yes, it is no xterm or x stuff on my Linux server(Using Hosting24.com hostage company)
Since then no X term on my server, so it might go to use TIghtVNC, and it need install VNCserver on my linux server and install VNC viewer in my XP PC window and Putty with SSH/X11 to get all work donw Right ?
But I think I am not able to install TIghtVNCserver on my server since I don't access right to root dirrectory of my server ?
I try install run command,# apt-get install tightvncserver also reply no such command, so I don't know what kind of server is,
everything is no such command.
Up to this moment for my message, I still not able to use TightVNC on server and PC, IS it RIght ? Any other atlernative.
Please advise
Duncan
Since then no X term on my server, so it might go to use TIghtVNC, and it need install VNCserver on my linux server and install VNC viewer in my XP PC window and Putty with SSH/X11 to get all work donw Right ?
But I think I am not able to install TIghtVNCserver on my server since I don't access right to root dirrectory of my server ?
I try install run command,# apt-get install tightvncserver also reply no such command, so I don't know what kind of server is,
everything is no such command.
Up to this moment for my message, I still not able to use TightVNC on server and PC, IS it RIght ? Any other atlernative.
Please advise
Duncan
Assisted Solution
Expert: Kerem ERSOY replied at 2024-04-30 10:37:34
62 points EXCELLENT
First of all you use either XMing or TightVNC. XMING is an Xserver it will only work if you have X applications isntalled on your remote server nad they can send the output to your XServer (Ususally TCP/6000 port). This is where we use PuTTY but since it has its own selection we don't have to hardcode its port number just clicking the box is sufficient.
Fot TightVNC (or any other VNC client for that matters) to work you need to setup and run VNCServer on your remote Linux Server first. Then you will need to map internal servers TCP/5900 port to your firewall so that you can access it through TightVNC. Another method is again to tunnel TCP/5900 Traffic over the PuTTY.
In both methods you've got to have some applications capable of using X. Though it's been a while you did not provide information about what distro are you using? Are you sure any X related application was installed on your server or what ( previously you've told when you type xterm the system could not find it).
If you insist on picking some parts of outr advice and ignore other parts I don't think this will be a productive help.
Fot TightVNC (or any other VNC client for that matters) to work you need to setup and run VNCServer on your remote Linux Server first. Then you will need to map internal servers TCP/5900 port to your firewall so that you can access it through TightVNC. Another method is again to tunnel TCP/5900 Traffic over the PuTTY.
In both methods you've got to have some applications capable of using X. Though it's been a while you did not provide information about what distro are you using? Are you sure any X related application was installed on your server or what ( previously you've told when you type xterm the system could not find it).
If you insist on picking some parts of outr advice and ignore other parts I don't think this will be a productive help.
Expert: arnold replied at 2024-04-30 10:37:09
Probably should have add the I in the "don't use xming, used cygwin X-server"
xming does not require much to install. Download and run, the default options are fine and it start xming and it works. The asker seems to have gone the extra step and launched the xlaunch which is the xming configuration utility.
xming includes an installation of putty and within the configuration has to option to start a remote program with putty as one of the options.
xming does not require much to install. Download and run, the default options are fine and it start xming and it works. The asker seems to have gone the extra step and launched the xlaunch which is the xming configuration utility.
xming includes an installation of putty and within the configuration has to option to start a remote program with putty as one of the options.
Expert: Kerem ERSOY replied at 2024-04-30 10:28:23
@arnold: Don't use xming, used cygwin X-server.
He is not even properly running XMing how do you expect a novice user to insall CygWin. IT is bulky requires knowledger to run etc. Let alone he is not sure he will use X server or :(
He is not even properly running XMing how do you expect a novice user to insall CygWin. IT is bulky requires knowledger to run etc. Let alone he is not sure he will use X server or :(
Assisted Solution
Expert: arnold replied at 2024-04-30 10:22:13
62 points EXCELLENT
Don't use xming, used cygwin X-server.
Back to what you have.
this is during the configuration,
start no client if you plan on using putt.
start a program presumably means that xming will open xterm in its interface. here you
XDMCP is for remote Console login simlar to what VNC would provide. You would need dtlogin running on the remote system as well as have firewall rules to allow this traffic through.
Do not put anything in the X11 display location from prior instructions.
When you hover over the X in the taskbar, it should say something like Xming Server: 0.0
You can use the Xlaunch and make sure you have it configured for multiview which means that you can send multiple windows from the remote session and not just one. no client. and accept the rest of the defaults.
Back to what you have.
this is during the configuration,
start no client if you plan on using putt.
start a program presumably means that xming will open xterm in its interface. here you
XDMCP is for remote Console login simlar to what VNC would provide. You would need dtlogin running on the remote system as well as have firewall rules to allow this traffic through.
Do not put anything in the X11 display location from prior instructions.
When you hover over the X in the taskbar, it should say something like Xming Server: 0.0
You can use the Xlaunch and make sure you have it configured for multiview which means that you can send multiple windows from the remote session and not just one. no client. and accept the rest of the defaults.
Author: duncanb7 replied at 2024-04-30 10:04:13
I check this link at http://www.cyberciti.biz/faq/access-linux-from-windows-xp-system/
I need to upload TightVPN server into my Linux but I could not run command #apt-get install tightvncserver
apt-get no such command on my server
I need to upload TightVPN server into my Linux but I could not run command #apt-get install tightvncserver
apt-get no such command on my server
Author: duncanb7 replied at 2024-04-30 10:02:12
I am using Putty software to access my server everyday
Expert: mrjoltcola replied at 2024-04-30 09:54:43
I can't help more, since you won't answer my questions about how you access your server. Good luck.
Author: duncanb7 replied at 2024-04-30 09:48:46
Step-1 I will try all you suggestion, X11, SSH tunning, ...etc for Putty connection. respect
to different Xming and TIght VNC
Step-2 How to setup XMing or TightVNC . There is a lot setup setting,
Step-3 my domain Adm support tell me just now , they never install xterm, x-server or xcal on the server I am using,
Could I download Opera web browser linux version into my server for Display testing, any suggestio
for check display test on XMing or TIghtVNC
Please advise
to different Xming and TIght VNC
Step-2 How to setup XMing or TightVNC . There is a lot setup setting,
Step-3 my domain Adm support tell me just now , they never install xterm, x-server or xcal on the server I am using,
Could I download Opera web browser linux version into my server for Display testing, any suggestio
for check display test on XMing or TIghtVNC
Please advise
Author: duncanb7 replied at 2024-04-30 09:47:59
Step-1 I will try all you suggestion, X11, SSH tunning, ...etc for Putty connection. respect
to different Xming and TIght VNC
Step-2 How to setup XMing or TightVNC . There is a lot setup setting,
Step-3 my domain Adm support, they never install xterm, x-server or xcal on the server I am using,
Could I download Opera web browser linux version into my server for Display testing, any suggestio
for check display test on XMing or TIghtVNC
Please advise
Duncan
to different Xming and TIght VNC
Step-2 How to setup XMing or TightVNC . There is a lot setup setting,
Step-3 my domain Adm support, they never install xterm, x-server or xcal on the server I am using,
Could I download Opera web browser linux version into my server for Display testing, any suggestio
for check display test on XMing or TIghtVNC
Please advise
Duncan
Assisted Solution
Expert: mrjoltcola replied at 2024-04-30 09:38:44
62 points EXCELLENT
Just to repeat, nowhere in the question did you specify that you needed SSH.
VNC can work just fine in direct mode, without tunnelling, assuming you have a connection that allows it (VPN) or local network. Tunnelling is only needed if SSH is the only port allowed into the server.
So please specify how you access your server?
VNC can work just fine in direct mode, without tunnelling, assuming you have a connection that allows it (VPN) or local network. Tunnelling is only needed if SSH is the only port allowed into the server.
So please specify how you access your server?
Author: duncanb7 replied at 2024-04-30 09:37:11
Dear arnold,
I follow your instrcution for PUTTY setup
What option I should use for Xming, there is three ?
i-Start no client
ii-Start a program
iii-Open session vai XDMCP,
What is different ?
And I could not find any GUI apllication in my Linux server, please suggestion one for me to do a test
and I try xcalc ther is no such command.
If I found GUI application, you mean I run it on putty window and Xming window will display the result , RIght
I follow your instrcution for PUTTY setup
What option I should use for Xming, there is three ?
i-Start no client
ii-Start a program
iii-Open session vai XDMCP,
What is different ?
And I could not find any GUI apllication in my Linux server, please suggestion one for me to do a test
and I try xcalc ther is no such command.
If I found GUI application, you mean I run it on putty window and Xming window will display the result , RIght
Assisted Solution
Expert: arnold replied at 2024-04-30 09:28:10
63 points EXCELLENT
For VNC you have to install/configure VNC on the server and then adjust the relavent firewall/s to let tightVNC traffic in to the server.
Xming is the X server you have?
When it runs it should tell you the session ID it is bound to 0.0, 1.0, etc. 10.0 etc.
record this info for later use.
Open putty
Load the saved profile you have or if you use a default profile, go to the SSh category and X11 subcategory.
Here enable X11 forwarding.
add in the x display location localhost:0.0 or localhost:10.0 as it applies in your case.
Navigate back to the session category and save this change so that you will not have to repeat this every time.
Now when you establish a connection an X11 tunnel over ssh will be created such that when you execute any graphically dependent application in the terminal, it will be sent through the ssh X11 tunnel to your home PC.
Presumably, the only reason you want to use opera on the remote system is that the specific site is inaccessible from the outside?
Xming is the X server you have?
When it runs it should tell you the session ID it is bound to 0.0, 1.0, etc. 10.0 etc.
record this info for later use.
Open putty
Load the saved profile you have or if you use a default profile, go to the SSh category and X11 subcategory.
Here enable X11 forwarding.
add in the x display location localhost:0.0 or localhost:10.0 as it applies in your case.
Navigate back to the session category and save this change so that you will not have to repeat this every time.
Now when you establish a connection an X11 tunnel over ssh will be created such that when you execute any graphically dependent application in the terminal, it will be sent through the ssh X11 tunnel to your home PC.
Presumably, the only reason you want to use opera on the remote system is that the specific site is inaccessible from the outside?
Author: duncanb7 replied at 2024-04-30 09:13:36
After login SSH tunneling mode by PUTTY,
I go to TightzVNC Viewer and then input Tight/NC Server: 184:82:18080 and click connect
The connection is not connected.
Just want to know what I am doing , eveything is no responce.
Say ask, if connection in TightVNC is successfull, what I will see, new terminal prompt to
my XP wndows, and then I can run window command on Linux server for example, xcalc ?
I go to TightzVNC Viewer and then input Tight/NC Server: 184:82:18080 and click connect
The connection is not connected.
Just want to know what I am doing , eveything is no responce.
Say ask, if connection in TightVNC is successfull, what I will see, new terminal prompt to
my XP wndows, and then I can run window command on Linux server for example, xcalc ?
Expert: Kerem ERSOY replied at 2024-04-30 08:38:35
> Three I have tried three option , but just give me a tilte of Xming :0:0 window after connecting to my
> server by putty
This is what I kept telling you about. Wneh you pick any of the options you just have a "listening" X server nothing more. PuTTY without configuring it to direct X traffic to your local system would not send anything to it.
Furthermore as you've previouly noticed there are not X capable programs istalled on your remote linux system.
Please stop improvising on your own for this is for someone who exactly knows what to do and follow the directions we've provide including the answers to he questions we've asked.
From the very first message on I've kept asking what distro are you using. When you answer it I'll be able to provide you the exact instructions on how to install some X capable programs that could provide you soe output on your local system. Also please tell me if you have followed the instructions on how to redirect X output over the PuTTY already or not.
Cheers,
K.
> server by putty
This is what I kept telling you about. Wneh you pick any of the options you just have a "listening" X server nothing more. PuTTY without configuring it to direct X traffic to your local system would not send anything to it.
Furthermore as you've previouly noticed there are not X capable programs istalled on your remote linux system.
Please stop improvising on your own for this is for someone who exactly knows what to do and follow the directions we've provide including the answers to he questions we've asked.
From the very first message on I've kept asking what distro are you using. When you answer it I'll be able to provide you the exact instructions on how to install some X capable programs that could provide you soe output on your local system. Also please tell me if you have followed the instructions on how to redirect X output over the PuTTY already or not.
Cheers,
K.
Assisted Solution
Expert: mrjoltcola replied at 2024-04-30 08:31:40
63 points EXCELLENT
I must encourage you to consider KeremE's original suggestion about VNC. One reason being that you can diconnect from the VNC X desktop without closing the server apps, whereas with regular X, once you close the client, the session is gone. I frequently move from office to home and vice-versa, and leave long-running apps on my VNC desktop.
Also, you may not need the SSH tunelling at all, if you are on the same network or connect via a VPN, just ensure the VNC port is allowed by your Linux server firewall.
Also, you may not need the SSH tunelling at all, if you are on the same network or connect via a VPN, just ensure the VNC port is allowed by your Linux server firewall.
Author: duncanb7 replied at 2024-04-30 08:24:36
Three I have tried three option , but just give me a tilte of Xming :0:0 window after connecting to my server by putty
Expert: Kerem ERSOY replied at 2024-04-30 07:11:56
I'd pick the first option. It will be just listening the X port. The second option will be launching another program in our case we don't need it. The third option will initiate XDMCP whichh will announce itself as an X server for other headless X servers on the network which is also irrelevant in our case.
You need to provide an output to your X first. So lets focus on the server side.
You need to provide an output to your X first. So lets focus on the server side.
Author: duncanb7 replied at 2024-04-30 07:06:55
Okay, first step:
1-I have connected to my server 184.82.217.80 throught PUtty Standalone program on my XP
2- Open XLauch ,selet One window option and then next
There is three option
i-Start no client
ii-Start a program
iii-Open session vai XDMCP,
I try three option that is only giving me a dump window nothing inside at complete the option.
WHich option, I should select ?
1-I have connected to my server 184.82.217.80 throught PUtty Standalone program on my XP
2- Open XLauch ,selet One window option and then next
There is three option
i-Start no client
ii-Start a program
iii-Open session vai XDMCP,
I try three option that is only giving me a dump window nothing inside at complete the option.
WHich option, I should select ?
Expert: Kerem ERSOY replied at 2024-04-30 07:06:08
> Actully, I connect my server by Putty standone program, there is no issue at all
> I can access my Linux domain, and I know Putty terminal is not allowed to run
> any window application or GUI stuff on my XP pC
Putty will be used to redirect X output to your XP client not for actually displaying anything GUI.
> When I run Xming on PC XP to display server's information, nothing I can see, just a dump terminal.
This is normal for XMing is only an X server. Without proper application supplying anything on it all will get is what you have now...
> I can access my Linux domain, and I know Putty terminal is not allowed to run
> any window application or GUI stuff on my XP pC
Putty will be used to redirect X output to your XP client not for actually displaying anything GUI.
> When I run Xming on PC XP to display server's information, nothing I can see, just a dump terminal.
This is normal for XMing is only an X server. Without proper application supplying anything on it all will get is what you have now...
Expert: Kerem ERSOY replied at 2024-04-30 07:02:33
It seems that your installation did not include X components. What distro are you using ??
Author: duncanb7 replied at 2024-04-30 07:00:04
Actully, I connect my server by Putty standone program, there is no issue at all
I can access my Linux domain, and I know Putty terminal is not allowed to run
any window application or GUI stuff on my XP pC
When I run Xming on PC XP to display server's information, nothing I can see, just a dump terminal.
I can access my Linux domain, and I know Putty terminal is not allowed to run
any window application or GUI stuff on my XP pC
When I run Xming on PC XP to display server's information, nothing I can see, just a dump terminal.
Author: duncanb7 replied at 2024-04-30 06:57:10
I just connect to my Linux server host domain in which it seems there is no any xterm, Xserver, all is no such command
Accepted Solution
Expert: Kerem ERSOY replied at 2024-04-30 06:29:14
63 points EXCELLENT
Hi,
First of all lets clarify:
- You have your X server in your office which runs Linux.
- You want to connect to your server from home XP computer.
If this is the case you'll need some options:
- If your connection to internet is not very fast I don's suggest you to run X. Becasue X refreshes the whole screen as you move your mouse etc and requires alot of bandwith. This is only good if you have a very fast internet connection (such as 10 Mbps and symmetric connections)
Anyway you can use your PuTTY to direct X traffic to your SSH Tunnel. Here's how:
http://oldsite.precedence.co.uk/nc/putty.html
Then you'll need to run an Xserver over your XP Client such as XMing.
http://sourceforge.net/projects/xming/
- Otherwise I'll suggest you to use VNC.
-You'll run VNC server over your server and VNC client at your home PC.
- You'll setup your Linux Network Firewall to allow you to connect your server's VNC port from internet.
You did not mention what linux distro do you have and this is why I can't tell how can you install VNC.
But for the client you can use this one: http://www.tightvnc.com/
You also need to setup your firewall to redirect traffic to your port TCP/5900 to your Linux Server.
Cheers,
K.
First of all lets clarify:
- You have your X server in your office which runs Linux.
- You want to connect to your server from home XP computer.
If this is the case you'll need some options:
- If your connection to internet is not very fast I don's suggest you to run X. Becasue X refreshes the whole screen as you move your mouse etc and requires alot of bandwith. This is only good if you have a very fast internet connection (such as 10 Mbps and symmetric connections)
Anyway you can use your PuTTY to direct X traffic to your SSH Tunnel. Here's how:
http://oldsite.precedence.co.uk/nc/putty.html
Then you'll need to run an Xserver over your XP Client such as XMing.
http://sourceforge.net/projects/xming/
- Otherwise I'll suggest you to use VNC.
-You'll run VNC server over your server and VNC client at your home PC.
- You'll setup your Linux Network Firewall to allow you to connect your server's VNC port from internet.
You did not mention what linux distro do you have and this is why I can't tell how can you install VNC.
But for the client you can use this one: http://www.tightvnc.com/
You also need to setup your firewall to redirect traffic to your port TCP/5900 to your Linux Server.
Cheers,
K.
